df40 2008 help

  Printable Version
Suzuki >> SUZUKI MARINE >> DF70/60, DF50/40, DF30/25 >> df40 2008 help Page: [1]
Login
Message << Older Topic   Newer Topic >>
df40 2008 help - 1/28/2008 6:25:46 AM   
Zeus

 

Posts: 2
Joined: 1/28/2008
Status: offline
Hello there. I got my df40 this summer and I'm looking to improve its preformance for best economy and speed.

There is absolutely no problem with engine, but I want to balance it out a little and if possible-tune it. I have inflatable boat( 410cm) and with all equiptment + pilot, it weighs around 230kg. As you know- gear ratio is 2.27 and max RPM is 6200, propeller is standard(13 inch). I can get to 6200 rpm in no time, but I'm not sure if it is necessary to buy a new propeller. I can get to that rpm with 2 more people on board(but it takes a little more time, naturaly:-).

So what I want to know- Is 6200 rpm limited electronicaly? If it is, can I remove it(or set it a little higher) by myself, or do I need to go to Suzuki dealer? Is it even possible to remove limiter? I think my df40 can go up to 6500 without a problem.

Next question- is there any difference in preformance of stainless steel and alluminium propellers?

And finaly- can I tune it to higher horsepower at all?

Thanks

Attachment (1)
Post #: 1
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Suzuki Forum >> SUZUKI MARINE >> DF70/60, DF50/40, DF30/25
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
patrick184
shortbusx133
chillinpapes105
drdavemac53
willkrupnik50
c50wi44
gsxrboy27
jengreen23
scarab9261422
mal688421

New Vendors
K&N Engineering, Inc.

Suzuki Forum .com is not affiliated with or endorsed by Suzuki Motor Corporation.